Size & Planning Guide

FOCEAN flooring is supplied as DIY sheets. Choose the full sheet dimensions on the product page, then plan the cuts around your boat. One sheet is included per unit ordered.

1. Measure each area

Measure the length and width of each separate deck area. Include steps, side sections and access panels in your plan. Keep drains, hatches, seat bases, hinges and fittings clear.

2. Make templates

Use paper or card to trace irregular shapes, curves and cutouts. Mark the direction of the pattern on every piece. Dry-fit the templates on the boat before ordering or cutting.

3. Compare sheet sizes

Available dimensions vary by product. Use the sizes shown beside the purchase options and in the product size guide. The coverage table gives the full sheet area before cutting, not the final usable coverage.

To calculate approximate coverage in square feet, multiply length in inches by width in inches, then divide by 144. Allow extra material for trimming, matching the pattern and unusable offcuts.

4. Choose the backing

Select Self-developed Adhesive or 3M Adhesive before adding the item to your cart. Check the selected size, backing and quantity in the cart. The price and availability depend on your selected variant.

Before you order

  • This is a DIY sheet, not a boat-specific pre-cut kit.
  • Product photos may show several widths or example installations. Your order includes the selected size and quantity.
  • Colors can appear different under different lighting and screen settings.
  • Check surface compatibility and read the installation & care guide.

Need help planning? Contact FOCEAN with your measurements and questions.

Plan your deck project

A buying guide. Follow the instructions supplied with your selected product.

  • Step1

    Measure your space

    Measure the areas you want to cover, including hatches, edges and fittings.

  • Step2

    Choose your style

    Compare pattern, color and sheet dimensions on the product listing.

  • Step3

    Check before applying

    Read the product instructions for surface compatibility, preparation and application conditions.

Start with your layout

Measure each area separately. Mark hatches, hinges, drains, seat mounts and fittings. Decide which way the pattern should run before planning your cuts.

A paper or cardboard template can help you check shapes before cutting flooring. Keep moving parts and drainage paths clear.

Compare dimensions before ordering

Use the exact dimensions shown for your chosen product option. A sheet-area calculation is only a starting point: your layout, cut direction, offcuts and trimming determine how much material you need.

For reference, inches × 25.4 gives millimeters. Check every measurement and unit before placing your order.

Need help planning?

Contact FOCEAN with your measurements, layout and preferred flooring style.